D15H19 M8 Nozzle Lasermech Cutting Head Laser Nozzles Three D Type

3D Laser Cutter Machine Consumables Lasermech Parts Three-D Laser Cutting Nozzle

Fiber Laser Nozzle is an essential component. It is through the cutting nozzle that the laser beam and cutting gas meet the work sheet.

- High Efficiency: The laser nozzle has excellent electrical and thermal conductivity, high hardness and corrosion resistance.
- High Accuracy: High processing accuracy, no burrs and fast cutting speed.
- Faster Cutting: Fast cutting speed, high surface finish and long service life.
- Good Durability: High quality raw material can make sure the durability and stability of the product.

D15H19 M8 Nozzle Lasermech Cutting Head Laser Nozzles Three D Type

E-mail: topbright@yeah.net
Mob/ Whatsapp: +86 15253270037

Operation tips

Adjust the correct position of the nozzle of the laser cutting machine. Check whether the laser is in the center of the nozzle every time the sheet is cut. If the focused light is not in the center of the nozzle, adjust the coaxiality Commonly used coaxiality adjustment steps in production are as follows:

(1) Stick a sticker on the end surface of the nozzle of the laser cutting machine

(2) Use 10-20 watts of power to manually punch holes (laser shots) and observe the phenomenon, and then take out the white sticker, taking care not to rotate its relative position.

(3) When the nozzle position is too far from the laser center, the center point cannot be printed.

(4) Try to print the center point. When the center point is large and small, please pay attention to whether the conditions are consistent and whether the focusing lens is loose. When the center point is not in the center of the nozzle of the laser cutting machine, the adjustment screw can be adjusted repeatedly until the process requirements are met.

D15H19 M8 Nozzle

M8 Nozzle Lasermech

Lasermech Cutting Head Laser Nozzles

D15H19 M8 Nozzle Lasermech Cutting Head Laser Nozzles Three D Type Images